VibrationVIEW Software

VibrationVIEW software is used to set up and monitor vibration tests and to perform reporting.

Some of the main features are:

  • Windows compatible. Runs on all versions of Microsoft Windows .
  • Intuitive. Easy test set up and monitoring
  • Tailor-made. Alternate units to measure things like sound pressure, micro strain, and any other engineering units. This option allows you to customize the inputs and graphs to your needs.
  • Automatic reports.
  • Fully customizable report templates.
  • Remote monitoring and control. Via the web and email.
  • Interchangeable. Use remote inputs and outputs to control and/or monitor other devices such as amplifiers and blowers.

Test Modules

VibrationVIEW can be configured for as many or as few test modules as you’d like. You need at least one to get started, but can add more at any time in the future. In fact, our modules are activated by electronic keys, so you can even “lease” modules if you find you have short term needs for specific tests.

SINE – Run swept and/or fixed-frequency sine wave vibration tests, with control of acceleration, velocity, and displacement.

SINE ON SINE – Run mixed-mode tests with up to 32 sine tones simultaneously.

RANDOM – Run Controlled spectrum random tests (tests with a spectrally shaped gaussian amplitude distribution).

iDOF® – Prevent under or over testing on high value products where tight tolerances and short duration random testing is required.

SINE ON RANDOM – Run mixed-mode tests with sine tones superimposed on a random background.

RANDOM ON RANDOM – Run controlled spectrum random tests with swept random "tones" superimposed on a random background.

KURTOSION® – Re-introduce the high acceleration peaks back into your random vibration tests. Our patented -solution to when your in-service vibration environment is not Gaussian.

RANDOM IMPORT – Import your time-based vibration data recording and convert to a power spectral density curve with breakpoint table.

FATIGUE DAMAGE SPECTRUM – Measure your products fatigue and calculate its lifespan. Commonly used life acceleration techniques are applied to shorten test time.

SHOCK – Run standard classical shock pulses as well as (optional) user-defined or SRS synthesized transient pulses.

SRS - Perform Shock Response Spectrum (SRS) analysis. Run a shock pulse defined by a frequency vs. G peak table. Many different waveform synthesis generation techniques included. 

TRANSIENT CAPTURE – Capture a transient waveform for post process. Use alone for data acquisition, or with SRS for Shock Response Spectrum analysis.

FIELD DATA REPLICATION – Reproduce, in your test lab on your shaker, the actual acceleration waveforms you measure in the field. The controller automatically compensates for shaker and fixture response.

EARTHQUAKE – Run a shock pulse defined by a frequency vs. G peak table. Many different waveform synthesis generation techniques included. 

RECORDERVIEW - Record your field acceleration measurements digitally, directly to your PC's hard drive. RecorderVIEW can be stream all the inputs and outputs to the hard drive while running other test modes, or used by itself as a field data recorder.



test setup


9500 catalog


The Innovator in Sound and Vibration Technology